TIME CHANGE
INSTRUCTIONS
Electra Elite 48 / 192 - Electra
Professional I
Electra
Professional II – Electra Elite IPK
The
Clock/Calendar can only be set from a Display Multiline Terminal that is
connected to
01 or 02.
1. Press <FEATURE or FNC>
2. Press 9
3. Press #
4. Press current time (example 0,2,1,4)
5. Press <RECALL> to toggle AM/PM
6. When ONLY setting the time, press <FEATURE or FNC> to end the procedure
7. Press <HOLD> to advance to the calendar
8. Press <RECALL> to select the day of the week
9. Press # to move the cursor to the day of the month setting
10. Use the dial pad to enter the day
11. Press <RECALL> to select the month
12. Press # to move the cursor to the year setting
13. Press the last two digits of the year
14. Press <FEATURE or FNC>
***************************************************************************************************************************
TIME CHANGE
INSTRUCTIONS
SV 8100 & Electra Elite IPK II
The
Clock/Calendar can only be set from a Display Multiline Terminal that is
connected to
1. Press the Speaker key.
2. Dial 728.
3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
4. Dial two digits for the minutes (00~59).
5. Press Speaker to hang up.
***************************************************************************************************************************
TIME CHANGE
INSTRUCTIONS
MARK 2
The Clock/Calendar can only be set from the Attendant Multiline Terminal.
1. Press <CNF>
2. Press *
3. <CNF> LED flutters
4. “PROGRAM CLOCK HOUR ??” is displayed on LED
5. Press Hour Setting (example 0,8)
6. Press DSS Key 20
7. “PROGRAM CLOCK MINUTE ??” is displayed on LED
8. Press Minute Setting (example 3,5)
9. Press DSS Key 20
10. “PROGRAM CLOCK DAY ??” is displayed on LED
11. Press Day Setting (example 0,4) (See NOTE 2)
12. Press DSS Key 20
13. “PROGRAM CLOCK MONTH ??” is displayed on LED
14. Press Month Setting (example press line key 7) (See NOTE 1)
15. Press DSS Key 20
16. “PROGRAM CLOCK YEAR ??” is displayed on LED
17. Press Year Setting (example 0,3)
18. Press <ANS> key to enter data
19. <CNF> LED goes off
NOTE 1: Valid Entries
Hour: 00-23
Minute: 00-59
Day: 01-31
Month: JAN-DEC (set by line key; L1=Jan, L2=Feb, L3=Mar, etc.)
NOTE 2: Day of the Week, Leap Year
Day of the week and leap year will be automatically set by entering month, date and year data.
***************************************************************************************************************************
TIME CHANGE
INSTRUCTIONS
NEAX 1000 / 1400 /
2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series III, Series E and Series i
Phones
CAT Mode Procedure: This is to be done while the phone is in an idle state.
1. Press <TRANSFER>
2. Press <CONF>
3. Press *
4. Press <TRANSFER>
5. Press <CONF>
6. Press #
7. “CAT MODE” displayed on LCD
8. Press <REDIAL or LNR/SPD>
9. “COMMAND” displayed on LCD
10. Press 02
11. Press <RECALL>
12. Press 2
13. Press <RECALL>
14. “02>2>Current Time” displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press <CONF>
***************************************************************************************************************************
NEAX 1000 / 1400 /
2000 IVS / 2000 IVS-2 / 2000 IPS
With Dterm Series II Phones
CAT Mode Procedure: This is to be done while the phone is in an idle state.
1. Press <TRANSFER>
2. Press <HOLD>
3. Press *
4. Press <TRANSFER>
5. Press <HOLD>
6. Press #
7. “CAT MODE” displayed on LCD
8. Press <SPEAKER>
9. “COMMAND” displayed on LCD
10. Press 02
11. Press <ANSWER>
12. Press 2
13. Press <ANSWER>
14. “02>2>Current Time” displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press <HOLD>
***************************************************************************************************************************